IMMU
DIAGNOSIS SYSTEM (BCM)
APPLICATION ITEMCONSULT-III performs the following functions via CAN communication with BCM.
| Diagnosis mode | Function Description |
| DATA MONITOR | The BCM input/output signals are displayed. |
| ACTIVE TEST | The signals used to activate each device are forcibly supplied from BCM. |
DATA MONITOR|
Monitor item |
Content |
|
CONFRM ID ALL |
Indicates [YET] at all time. Switches to [DONE] when a registered Intelligent Key is inserted into the key slot. |
|
CONFIRM ID4 |
|
|
CONFIRM ID3 |
|
|
CONFIRM ID2 |
|
|
CONFIRM ID1 |
|
|
TP 4 |
Indicates the number of ID which has been registered. |
|
TP 3 |
|
|
TP 2 |
|
|
TP 1 |
|
|
PUSH SW |
Indicates [ON/OFF] condition of push-button ignition switch. |
|
KEY SW -SLOT |
Indicates [ON/OFF] condition of key slot. |
ACTIVE TEST|
Test item |
Description |
|
THEFT IND |
This test is able to check security indicator lamp operation. The lamp will be turned on when “ON” on CONSULT-III screen touched. |