Item
|
Standard
|
Camber
|
Degree minute (Decimal degree)
|
Minimum
|
–1° 44′ (–1.73°)
|
Nominal
|
–1° 34′ (–1.57°)
|
Maximum
|
–1° 24′ (–1.40°)
|
Left and right difference
|
0° 20′ (0.33°) or less
|
Total toe-in
|
Distance
|
Minimum
|
Out 0.3 mm (0.012 in)
|
Nominal
|
In 1.7 mm (0.067 in)
|
Maximum
|
In 3.7 mm (0.146 in)
|
Angle (Left wheel or right wheel)
Degree minute (Decimal degree)
|
Minimum
|
Out 0° 01′ (0.01°)
|
Nominal
|
In 0° 04′ (0.07°)
|
Maximum
|
In 0° 09′ (0.15°)
|
Left and right difference
|
0° 10′ (0.16°) or less
|
Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Jack, hand tools and mats are in the specified positions.
|