With CONSULT-III
- Turn ignition switch ON.
- Perform “SUB FUEL PUMP RELAY” in “ACTIVE TEST” mode with CONSULT-III.
- Check the voltage between ECM harness connector terminals under the following condition.
ECM
| Condition
| Voltage
|
Connector
| +
| −
|
Terminal
| Terminal
|
F102
| 93
| 128
| Sub fuel pump relay: ON
| Battery voltage
|
Sub fuel pump relay: OFF
| Approx. 0 V
|
Is the inspection result normal?
YES
>>INSPECTION END
NO
>>Go to
Diagnosis Procedure (GT-R certified NISSAN dealer).