REMOVAL
 
 Rear diffuser (center)

    1.Remove the clips connecting with the rear bumper fascia (lower) lower surface.
    2.Remove the rear diffuser (center) mounting bolts.
    3.Remove the rear diffuser (center).
 
 Rear diffuser RH

    1.Remove the rear diffuser (center).
    2.Remove the mounting bolts and clips of rear diffuser RH.
    3.Remove the rear diffuser RH.
 
 Rear diffuser LH

    1.Remove the rear diffuser (center).
    2.Remove the mounting bolts and clips of rear diffuser LH.
    3.Remove the rear diffuser LH.
 
 INSTALLATION

Note the following, and install in the reverse order of removal.
■ CAUTION ■
  • Replace the mounting bolts with new ones to prevent electric corrosion when removing and installing the rear diffuser.
  • Visually check the clips for deformation and damage at installation. Replace with new ones if necessary.
  • Always tighten the mounting bolts to the specified torque.