DESCRIPTION

  • If the ignition switch is turned to the OFF position while the FRE switch is set to ON (fresh air intake), “Perform the memory” or “Do not perform the memory” of FRE switch ON (fresh air intake) condition can be selected.
  • If “Perform the memory” was set, the FRE switch will be ON (fresh air intake) when turning the ignition switch to the ON position again.
  • If “Do not perform the memory” was set, the air inlets will be controlled automatically when turning the ignition switch to the ON position again.
 
 HOW TO SET

With CONSULT-III
Perform the “FRE MEMORY SET” of HVAC work support item.

Work support items
Display
Setting
FRE MEMORY SET
WITHOUT (initial status)
Perform the memory of manual FRE
WITH
Do not perform the memory of manual FRE (auto control)

NOTE：
When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V or less, the setting of the FRE switch memory function may be cancelled.