1.CHECK BRAKE PEDAL STROKE
Check brake pedal stroke. Refer to
Inspection and Adjustment
.
Is the stroke too large?
YES
>>
Bleed air from brake tube and hose. Refer to
Bleeding Brake System
.
Check brake pedal, brake booster, and master cylinder for mount play, looseness, brake system fluid leakage, etc.
Brake pedal: Refer to
Inspection and Adjustment
.
Brake booster: Refer to
Inspection
.
Master cylinder: Refer to
Inspection
.
NO
>>
GO TO 2.
2.CHECK FUNCTION
Disconnect ABS actuator and electric unit (control unit) connector to deactivate ABS. Check if braking force is normal in this condition. Connect connector after inspection.
Is the inspection result normal?
YES
>>
Normal
NO
>>
Check brake system.