- Select each test menu item on ”ACTIVE TEST“.
- On the display, touch “Up”, “ACT UP”, “ACT KEEP”, and check that the system operates as shown in the table below.
Test item
| Display item
| Display (Note)
|
Up
| ACT UP
| ACT KEEP
|
FR RH ABS SOLENOID (ACT)
| FR RH IN SOL
| Off
| Off
| Off
|
FR RH OUT SOL
| Off
| Off
| Off
|
CV1
| Off
| On
| On
|
SV1
| Off
| On*
| Off
|
FR LH ABS SOLENOID (ACT)
| FR LH IN SOL
| Off
| Off
| Off
|
FR LH OUT SOL
| Off
| Off
| Off
|
CV1
| Off
| On
| On
|
SV1
| Off
| On*
| Off
|
RR RH ABS SOLENOID (ACT)
| RR RH IN SOL
| Off
| Off
| Off
|
RR RH OUT SOL
| Off
| Off
| Off
|
CV2
| Off
| On
| On
|
SV2
| Off
| On*
| Off
|
RR LH ABS SOLENOID (ACT)
| RR LH IN SOL
| Off
| Off
| Off
|
RR LH OUT SOL
| Off
| Off
| Off
|
CV2
| Off
| On
| On
|
SV2
| Off
| On*
| Off
|
*: “On” is indicated for 1 to 2 seconds after the touch and then changes to “Off”.
NOTE：
The On/Off indication may switch briefly at irregular intervals after turning ON the ignition switch. This is a validation operation and not a malfunction.
Is the inspection result normal?
YES
>>INSPECTION END
NO
>>Proceed to diagnosis procedure. Refer to
Diagnosis Procedure (GT-R certified NISSAN dealer).