- On “ACTIVE TEST”, select “ABS MOTOR”.
- Touch “On” and “Off” on screen. Make sure motor relay and actuator relay operates as shown in table below.
Test item
| Display item
| Display
|
On
| Off
|
ABS MOTOR
| MOTOR RELAY
| On
| Off
|
ACTUATOR RLY (Note)
| On
| On
|
NOTE：
The On/Off indication may switch briefly at irregular intervals after turning ON the ignition switch. This is a validation operation and not a malfunction.
Is the inspection result normal?
YES
>>INSPECTION END
NO
>>Proceed to diagnosis procedure. Refer to
Diagnosis Procedure (GT-R certified NISSAN dealer).