BCM CONSULT-III FUNCTION

CONSULT-III performs the following functions via CAN communication with BCM.

Diagnosis mode
Function Description
DATA MONITOR
The BCM input/output signals are displayed.
ACTIVE TEST
The signals used to activate each device are forcibly supplied from BCM.

 
 DATA MONITOR

Monitor Item
 		Contents
PUSH SW
 		Indicates [ON/OFF] condition of push-button ignition switch.
UNLK SEN -DR
NOTE：
 This item is displayed, but cannot be monitored.
VEH SPEED 1
 		Indicates [km/h] condition of vehicle speed signal from combination meter.
KEY CYL SW-TR
NOTE：
 This item is displayed, but cannot be monitored.
TR CANCEL SW
NOTE：
 This item is displayed, but cannot be monitored.
TR/BD OPEN SW
 		Indicates [ON/OFF] condition of trunk lid opener switch.
TRNK/HAT MNTR
NOTE：
 This item is displayed, but cannot be monitored.
RKE-TR/BD
NOTE：
 This item is displayed, but cannot be monitored.

 
 ACTIVE TEST

Test item
 		Description
TRUNK/GLASS HATCH
 		This test is able to check trunk lid opener actuator open operation.