1.CHECK “HAZARD ANSWER BACK” SETTING IN “WORK SUPPORT”
Check “HAZARD ANSWER BACK” setting in “WORK SUPPORT”.
Refer to
CONSULT-III Function (BCM - INTELLIGENT KEY)
.
Is the inspection result normal?
YES
>>
GO TO 2
.
NO
>>
Set “HAZARD ANSWER BACK” setting in “WORK SUPPORT”.
2.CHECK “HORN WITH KEYLESS LOCK” SETTING IN “WORK SUPPORT”.
Check “HORN WITH KEYLESS LOCK” setting in “WORK SUPPORT”.
Refer to
CONSULT-III Function (BCM - INTELLIGENT KEY)
.
Is the inspection result normal?
YES
>>
GO TO 3
.
NO
>>
Set “HORN WITH KEYLESS LOCK” setting in “WORK SUPPORT”.
3.CHECK HAZARD WARNING LAMP
Check hazard warning lamp.
Refer to
Component Function Check
.
Is the inspection result normal?
YES
>>
GO TO 4
.
NO
>>
Repair or replace the malfunctioning parts.
4.CHECK HORN
Check horn.
Refer to
Component Function Check
.
Is the inspection result normal?
YES
>>
GO TO 5
.
NO
>>
Repair or replace the malfunctioning parts.
5.CHECK VEHICLE SECURITY HORN
Check vehicle security horn.
Refer to
Component Function Check
.
Is the inspection result normal?
YES
>>
GO TO 6
.
NO
>>
Repair or replace the malfunctioning parts.
6.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>>
Check intermittent incident. Refer to
Intermittent Incident
.
NO
>>
GO TO 1
.