1.CHECK “TRUNK OPEN DELAY” SETTING IN “WORK SUPPORT”
Check “TRUNK OPEN DELAY” setting in “WORK SUPPORT”.
Refer to
CONSULT-III Function (BCM - INTELLIGENT KEY)
.
Is the inspection result normal?
YES
>>
GO TO 2
.
NO
>>
Set “TRUNK OPEN DELAY” setting in “WORK SUPPORT”.
2.CHECK TRUNK LID OPENER REQUEST SWITCH
Check trunk lid opener request switch.
Refer to
Component Function Check
.
Is the inspection result normal?
YES
>>
GO TO 3
.
NO
>>
Repair or replace the malfunctioning parts.
3.CHECK OUTSIDE KEY ANTENNA (REAR BUMPER)
Check outside key antenna (rear bumper).
Refer to
Component Function Check
.
Is the inspection result normal?
YES
>>
GO TO 4
.
NO
>>
Repair or replace the malfunctioning parts.
4.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>>
Check intermittent incident. Refer to
Intermittent Incident
.
NO
>>
GO TO 1
.