1.CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES
>>
GO TO 2
.
NO
>>
Check DTC for BCM. Refer to
DTC Index
.
2.CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter).
Refer to
Component Function Check
.
Is the inspection result normal?
YES
>>
GO TO 3
.
NO
>>
Repair or replace the malfunctioning parts.
3.CHECK COMBINATION METER DISPLAY
Check combination meter display.
Refer to
Component Function Check
.
Is the inspection result normal?
YES
>>
GO TO 4
.
NO
>>
Repair or replace the malfunctioning parts.
4.CHECK DOOR SWITCH
Check door switch (driver side).
Refer to
Component Function Check
.
Is the inspection result normal?
YES
>>
GO TO 5
.
NO
>>
Repair or replace the malfunctioning parts.
5.CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to
Component Function Check
.
Is the inspection result normal?
YES
>>
GO TO 6
.
NO
>>
Repair or replace the malfunctioning parts.
6.CHECK INSIDE KEY ANTENNA
Check inside key antenna.
Refer to
DTC Logic
(instrument center).
Refer to
DTC Logic
(console).
Refer to
DTC Logic
(trunk room).
Is the inspection result normal?
YES
>>
GO TO 7
.
NO
>>
Repair or replace the malfunctioning parts.
7.CHECK KEY SLOT ILLUMINATION
Check key slot illumination.
Refer to
Component Function Check
.
Is the inspection result normal?
YES
>>
GO TO 8
.
NO
>>
Repair or replace the malfunctioning parts.
8.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>>
Check intermittent incident. Refer to
Intermittent Incident
.
NO
>>
GO TO 1
.