1.CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES
>>
GO TO 2
.
NO
>>
Check DTC for BCM. Refer to
DTC Index
.
2.CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch.
Refer to
Component Function Check
.
Is the inspection result normal?
YES
>>
GO TO 3
.
NO
>>
Repair or replace the malfunctioning parts.
3.CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter).
Refer to
Component Function Check
.
Is the inspection result normal?
YES
>>
GO TO 4
.
NO
>>
Repair or replace the malfunctioning parts.
4.CHECK COMBINATION METER DISPLAY
Check combination meter display.
Refer to
Component Function Check
.
Is the inspection result normal?
YES
>>
GO TO 5
.
NO
>>
Repair or replace the malfunctioning parts.
5.CHECK INSIDE KEY ANTENNA
Check inside key antenna.
Refer to
DTC Logic
(instrument center).
Refer to
DTC Logic
(console).
Refer to
DTC Logic
(trunk room).
Is the inspection result normal?
YES
>>
GO TO 6
.
NO
>>
Repair or replace the malfunctioning parts.
6.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>>
Check intermittent incident. Refer to
Intermittent Incident
.
NO
>>
GO TO 1
.