1.CHECK POWER DOOR LOCK OPERATION
Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?
YES
>>
GO TO 2
.
NO
>>
Go to
Diagnosis Procedure
.
2.CHECK “DOOR LOCK–UNLOCK SET” SETTING IN “WORK SUPPORT”
Check “DOOR LOCK-UNLOCK SET” setting in “WORK SUPPORT”.
Refer to
CONSULT-III Function (BCM - DOOR LOCK)
.
Is the inspection result normal?
YES
>>
GO TO 3
.
NO
>>
Set “DOOR LOCK-UNLOCK SET” of “WORK SUPPORT”.
3.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>>
Check intermittent incident. Refer to
Intermittent Incident
.
NO
>>
GO TO 1
.