DTC DETECTION LOGIC
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B2616
Ignition relay circuit
An immediate operation of ignition relay (fuse block) is requested by BCM, but there is no response for more than 1 second
Harness or connectors
(Ignition relay circuit is open or shorted)
Ignition relay (Fuse block)
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
Turn ignition switch ON under the following conditions, and wait for at least 1 second.
Shift lever is in the P or N position.
Do not depress brake pedal.
Check “Self diagnostic result” with CONSULT-III.
Is DTC detected?
YES
>>
Go to
Diagnosis Procedure
.
NO
>>
INSPECTION END
