MOUNTING INSPECTION

Check the mounting conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal.
 
 BALL JOINT AXIAL END PLAY

    1.Set front wheels in a straight-ahead position.
    ■ CAUTION ■
    Never depress brake pedal when measuring.
    2.Place an iron bar or equivalent between front lower link, rear lower link radius rod or suspension arm and axle housing.
    3.Measure axial end play by playing it up and down.
    Standard
    Axial end play
    		: Refer to Ball Joint (GT-R certified NISSAN dealer).

    ■ CAUTION ■
    Be careful not to damage ball stud boot and ball joint boot. Never damage the installation position by applying excessive force.
 
 SHOCK ABSORBER

Check for oil leakage and damage. Replace it if necessary.