1. Turn ignition switch OFF.
2. Disconnect auto anti-dazzling inside mirror (homelink universal transceiver) connector.
3. Check voltage between auto anti-dazzling inside mirror (home link universal transceiver) harness connector and ground.

(+)		(-)	Condition	Voltage (V) (Approx.)
Auto anti-dazzling inside mirror (Homelink universal transceiver)
connector	Terminal	Ground	Ignition switch position: OFF	Battery voltage
R9	5

YES>>GO TO 2.

NO>>
Check the following.

• 10A fuse [No. 6 located in the fuse block (J/B)]
  
• Harness for open or short between fuse and auto anti-dazzling inside mirror (homelink universal transceiver).
  

Check continuity between auto anti-dazzling inside mirror (homelink universal transceiver) harness connector and ground.

Auto anti-dazzling inside mirror (Homelink universal transceiver) connector	Terminal	Ground	Continuity
R9	8		Existed

YES>>GO TO 3.

NO>>Repair harness.

Refer to Intermittent Incident.

>>INSPECTION END