EMISSION CONTROL SYSTEM

Abbreviations: R = Replace. I = Inspect. Correct or replace if necessary. [ ]: At the mileage intervals only < >: Performed based on the number of months only.
MAINTENANCE OPERATION
MAINTENANCE INTERVAL
Reference Section - Page or - Content Title
Perform at number of miles, kilometers or months, whichever comes first.
Miles x 1,000
(km x 1,000)
Months
6
(9.6)
6
12
(19.2)
12
18
(28.8)
18
24
(38.4)
24
30
(48)
30
36
(57.6)
36
42
(67.2)
42
48
(76.8)
48
54
(86.4)
54
60
(96)
60
Drive belts
NOTE (1)



I*

I*

I*

I*
Checking
Air cleaner filter
NOTE (2)




[R]




[R]
Removal and Installation
Air pump cleaner (For secondary air injection system)
NOTE (5)

<I>*

<I>*

<I>*

<I>*

[R]
Exploded View (GT-R certified NISSAN dealer)
EVAP vapor lines




I*



I*


Inspection
Fuel lines




I*



I*


Inspection (GT-R certified NISSAN dealer)
Fuel filter
NOTE (3)











Engine coolant




R*



R*


Draining
Engine oil

R
R
R
R
R
R
R
R
R
R
Draining
Engine oil filter (Use genuine NISSAN engine oil filter or equivalent.)

R
R
R
R
R
R
R
R
R
R
Removal and Installation
Spark plugs (Iridium-tipped type)










[R]
Removal and Installation
Intake & exhaust valve clearance*
NOTE (4)










Inspection (GT-R certified NISSAN dealer)
Engine startability and abnormal sound


<I>*

<I>*

<I>*

<I>*

<I>*

Driving performance at low and accelerating speed


<I>*

<I>*

<I>*

<I>*

<I>*

Throttle chamber deposits
NOTE (6)

<I>*

<I>*

<I>*

<I>*

<I>*
Inspection
Engine settings
NOTE (7)







I*

I*
Explanation of Performance Optimization Services
NOTE:
(1) Replace the drive belts if found damaged or if the auto belt tensioner reading reaches the maximum limit.
(2) If operating mainly in dusty conditions, more frequent maintenance may be required.
(3) Maintenance-free item. For service procedures, refer to FL section.
(4) Periodic maintenance is not required. However, if valve noise increases, inspect valve clearance.
(5) Visually inspect the filter element at specified intervals. Replace the filter assembly at specified intervals.
(6) Visually inspect the throttle chamber for deposits and clean as necessary.
(7) Balancing of air flow for left and right banks at specified intervals. However, if the performance optimization services including this inspection at 36 months (free of charge) have not been finished yet, this inspection is not necessary.
*Maintenance items and intervals with “*” are recommended by NISSAN for reliable vehicle operation. The owner need not perform such maintenance in order to maintain the emission warranty or manufacturer recall liability. Other maintenance items and intervals are required.


 
 CHASSIS AND BODY

Abbreviations: R = Replace. I = Inspect. Correct or replace if necessary. [ ]: At the mileage intervals only. < >: Performed based on the number of months only.
MAINTENANCE OPERATION
MAINTENANCE INTERVAL
Reference Section - Page or - Content Title
Perform at number of miles, kilometers or months, whichever comes first.
Miles x 1,000
(km x 1,000)
Months
6
(9.6)
6
12
(19.2)
12
18
(28.8)
18
24
(38.4)
24
30
(48)
30
36
(57.6)
36
42
(67.2)
42
48
(76.8)
48
54
(86.4)
54
60
(96)
60
Brake lines & cables


I

I

I

I

I
Inspection
Brake hoses










<R>
Inspection
Brake pads & rotors

I
I
I
I
I
I
I
I
I
I
Inspection
Brake fluid
NOTE (1)





<R>



<R>
Draining
Transmission oil & differential gear oil (front & rear)


I
[R]
I

[R]

I
[R]
I
Inspection
Inspection
Draining (GT-R certified NISSAN dealer)
Inspection
Draining (GT-R certified NISSAN dealer)
Steering gear & linkage, axle & suspension parts

I
I
I
I
I
I
I
I
I
I
Inspection
Inspection
Drive shaft boots and propeller shaft

I
I
I
I
I
I
I
I
I
I
Inspection
Inspection (GT-R certified NISSAN dealer)
Inspection (GT-R certified NISSAN dealer)
Exhaust system

I
I
I
I
I
I
I
I
I
I
Inspection (GT-R certified NISSAN dealer)
In-cabin microfilter


R

R

R

R

R
Removal and Installation
Transmission settings
NOTE (2)







I

I
Description (GT-R certified NISSAN dealer)
Measurement and adjustment of wheel alignment
NOTE (2)







I

I
Inspection
Inspection
NOTE:
(1) After 36 months, replace every 24 months.
(2) If the performance optimization services at 36 months (free of charge) including this inspection have not been finished yet, this inspection is not necessary.