OIL LEAKAGE

Check final drive surrounding area (oil seal, drain plug, carrier case, etc.) for oil leakage.
 
 OIL LEVEL

  • Remove filler plug (1) and gasket. Then check that oil is filled up (A) from mounting hole for the filler plug.
    NNDID0027ZZ.JPG
    ■ CAUTION ■
    Never start engine while checking oil level.
  • Set a gasket on filler plug (1) and install it on final drive, and then tighten to the specified torque.
    Standard

    Filler plug tightening torque
    		: 34.5 N·m (3.5 kg‐m, 25 ft‐lb)

    ■ CAUTION ■
    Never reuse gasket.