Headlight Switch

REMOVAL & INSTALLATION

The switch is located at the left side of the instrument panel and is combined with the illumination intensity control switch.

1. Disconnect the negative (-) battery cable.
2. Remove the steering column-to-dash screws and pull downward on the steering column.
3. Remove the instrument cluster visor-to-dash screws and the visor from the instrument cluster.
4. Disengage the electrical harness connector from the headlight switch assembly.
5. Pull the headlight knob out.
6. Remove the headlight switch-to-visor nut and the switch from the visor.
7. Installation is the reverse of removal. Check the operation of the headlights.