- Disconnect the rear exhaust pipe from the front exhaust pipe (Non-Turbo),
center exhaust pipe (turbocharged models).
- Disconnect the rear exhaust pipe from the muffler assembly. To prevent damage
to the bumper or rear skirt by the muffler, wrap a cloth around the tail pipe.
- Remove rear exhaust pipe from the rubber cushion. To help in its, apply
a coat of penetrating lubricant to the mating surface of the rubber cushion
in advance.
- Installation is the reverse of removal. Temporarily connect each exhaust
pipe then insert the pipe bracket into the rubber cushion.
- Adjust the clearance between the temporarily installed parts and tighten
to specified torque.
