CONTROL ARM BUSHING REPLACEMENT

Front Bushing

1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
2. Remove or disconnect the following:
   • Wheel
   • Control arm
3. Press the bushing out using Installer/Remover tool 927680000

   To install:

4. Press the bushing in using Installer/Remover tool 927680000
5. Install or connect the following:
   • Control arm
   • Wheel

Rear Bushing

1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
2. Remove or disconnect the following:
   • Wheel
   • Control arm and matchmark the bushing for reassembly
   • Nut and bushing

   To install:

3. Install or connect the following:
   • Bushing into control arm and align the matchmark. Torque the nut to 137 ft. lbs. (186 Nm).
   • Control arm
   • Wheel