To Remove:
- Remove or disconnect the following
- Strut lower mounting nuts and bolts
- Lower control arm ball joint to knuckle bolt
- Sway bar to control arm bolt
- Outer tie rod end
- Brake caliper
- Brake rotor
- Outer CV shaft nut
- CV shaft from knuckle
To Install:
- Install or connect the following
- CV shaft to knuckle
- Outer CV shaft nut
- Brake rotor
- Brake caliper
- Outer tie rod end
- Sway bar to control arm bolt
- Lower control arm ball joint to knuckle bolt
- Strut lower mounting nuts and bolts
- Check and adjust vehicle wheel alignment
