Subaru BRZ 2013 · Service Manual Preparation items

Engine mechanical

Preparation

PREPARATION ITEMS

ENGINE MECHANICAL

SST

Illustration	Tool number	Name	Remarks
	1B023XG0	SUBARU SELECT MONITOR III KIT	Used for diagnosing electrical system failure.
	18252AA000	CRANKSHAFT SOCKET	Used for rotating crankshaft.
	18355AA000	PULLEY WRENCH	·Used for removing and installing crankshaft pulley. ·Used for removing and installing water pump pulley. ·Used for removing and installing camshaft timing intake gear ASSY and camshaft timing exhaust gear ASSY.
	18334AA030	PULLEY WRENCH PIN SET	Used for removing and installing water pump pulley, camshaft timing intake gear ASSY, and camshaft timing exhaust gear ASSY.
	18270KA010	SOCKET	Used for removing and installing camshaft timing intake gear ASSY and camshaft timing exhaust gear ASSY.
	18854AA000	ANGLE GAUGE	Used for tightening cylinder head bolt.
	18334AA000	PULLEY WRENCH PIN SET	·Used for removing and installing crankshaft pulley. ·Used for removing and installing drive plate & ring gear SUB-ASSY and flywheel SUB-ASSY.
	18332AA20	OIL FILTER WRENCH	Used for removing and installing oil filter SUB-ASSY.
	398437700	OIL SEAL INSTALLER	Used for installing timing chain cover oil seal.
	18671AA020	OIL SEAL GUIDE	Used for installing engine rear oil seal.
	18657AA030	OIL SEAL INSTALLER	Used for installing engine rear oil seal.
	18750AA010	STOPPER	Used for securing torque converter.
	18632AA010	STAND ASSY	Used for removing and installing engine ASSY.
	12281-38150	ENGINE HANGER NO. 1	Used for removing and installing engine ASSY.
	90119-14120	BOLT	Used for removing and installing engine ASSY.

Tool name	Remarks
Compression gauge	Used for measuring compression.
Compression gauge attachment	Used for measuring compression.
Thickness gauge	Used for measuring camshaft clearance.
Micrometer	Used for measuring camshaft clearance.
Hexagon wrench (diameter: 2.5 mm {0.0984 in})	Used for securing chain tensioner ASSY NO. 1.
Socket hexagon (5 mm {0.197 in})	Used for removing and installing chain vibration damper NO. 1.
Torx Plus socket wrench 40IP	Used for removing and installing fuel pump ASSY.
Oil pan seal cutter	Used for removing oil pan pump SUB-ASSY NO. 2.

LUBRICANT, ETC.

Name	Part number	Location of use
Wire (diameter: approx. 1 mm {0.0394 in})	—	Chain tensioner ASSY NO. 2
THREE BOND 1217G or equivalent	K0877Y0100	·Front camshaft cap, intake rear camshaft cap, and exhaust rear camshaft cap ·Camshaft housing SUB-ASSY ·Cylinder head gasket NO. 2 ·Cylinder head cover SUB-ASSY, cylinder head cover SUB-ASSY LH ·Cylinder head plate RR ·Vacuum pump ASSY ·Oil pan SUB-ASSY ·Oil pan SUB-ASSY NO. 2
Rope	—	Exhaust pipe ASSY FR
Compressor oil	—	Compressor ASSY, suction hose SUB-ASSY
Protective tape	—	Timing chain cover oil seal, engine rear oil seal, cylinder head cover SUB-ASSY