Steering gear / linkage

Preparation

PREPARATION ITEMS

STEERING GEAR / LINKAGE

SST

Illustration	Tool number	Name	Remarks
	09616-00011	STEERING WORM BEARING ADJUSTING SOCKET	Used for checking total preload.
	09922-10010	VARIABLE OPEN WRENCH	Used for removing steering rack end SUB-ASSY and steering rack guide spring cap lock nut.
	28099AC000	BOOT BAND PLIERS	Used for installing steering rack boot clamp NO. 1.
	34299CA000	SPECIAL TOOL	Used for removing, installing, and adjusting steering gear box yoke plug.

GENERAL TOOL

Tool name	Remarks
Socket hexagon	Used for disconnecting and installing stabilizer link.
Ball joint puller	Used for disconnecting tie-rod end SUB-ASSY.

LUBRICANT, ETC.

Name	Part number	Location of use
THREE BOND 1141G /1102 or equivalent	—	Threaded portion of steering rack guide spring cap
Toshiba silicone TSM650, Idemitsu Autorex A or equivalent	—	Inside of the smaller opening of steering rack boot NO. 1