Wheel and tire system
Removal / installation
WHEEL & TIRE
WHEEL AND TIRE SYSTEM
INSPECTION
1. Tire inspection
(1) Check the tires for wear. Replace the tires if wear exceeds service limits.
(2) Check the tire air pressure.
2. Tire rotation
3. Wheel balance inspection
(1) Inspect the wheel balance (off-the-car balance) and adjust as necessary.
Unbalance after inspection
: 10 g {0.35 oz} or less
(2) If symptoms such as tire vibration occur even after performing off-the-car balance adjustment, perform on-the-car adjustment as necessary.
4. Axial play inspection of front axle hub bearing (Refer to 
)
)5. Runout inspection of front axle hub bearing (Refer to )
)6. Axial play inspection of rear axle hub bearing (Refer to )
)7. Runout inspection and adjustment of rear axle hub bearing (Refer to )
)