1. Remove the manual transmission assembly from the vehicle. 
2. Remove the back-up light switch and the neutral position switch.
3. Remove the transfer case together with the extension case assembly.
4. Remove the transmission case.
5. Remove the drive pinion shaft assembly.
6. Remove the main shaft assembly.
Single-range model
Dual range model
7. Remove the differential assembly.
8. Remove the shifter forks and rods.
9. Pull out the straight pin, and remove the reverse idler gear shaft, reverse idler gear and washer.
|
(A) |
Straight pin |
|
(B) |
Reverse idler gear shaft |
|
(C) |
Reverse idler gear |
|
(D) |
Washer |
10. Remove the reverse shifter lever.