| CHECK RESISTANCE OF THE ABS WHEEL SPEED SENSOR. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from ABS wheel speed sensor. 3) Measure the resistance between ABS wheel speed sensor connector terminals. Terminals Front RH No. 1 — No. 2: Front LH No. 1 — No. 2: Rear RH No. 1 — No. 2: Rear LH No. 1 — No. 2: |
| QUESTION | |
|
Is the resistance as shown below? Front: 1.0 — 1.5 kΩ, Rear: 1.025 — 1.265 kΩ | |
| Yes | No |
|
|
Replace the ABS wheel speed sensor. Front: |
