| CHECK INPUT SIGNAL FROM TCM. |
|
1) Depress the brake pedal. 2) Measure the voltage of the harness between TCM and stop light switch. Connector & terminal (B55) No. 20 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage more than 10 V? | |
| Yes | No |
|
|
|
| CHECK INPUT SIGNAL FROM TCM. |
|
1) Depress the brake pedal. 2) Measure the voltage of the harness between TCM and stop light switch. Connector & terminal (B55) No. 20 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage more than 10 V? | |
| Yes | No |
|
|
|
