| CHECK HARNESS BETWEEN SECONDARY AIR PUMP RELAY AND SECONDARY AIR PUMP CONNECTOR. |
|
1) Turn the ignition switch to OFF. 2) Remove the secondary air pump relay from the relay box. 3) Measure resistance between the secondary air pump relay and secondary air pump connector terminal Connector & terminal (F9) No. 5 — (F11) No. 2 : |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
|
Repair the open circuit between secondary air pump relay and secondary air pump connector terminal. |
