EGR-2 Test
Precautions: General safety (00)
After replacing EGR-2 valve with new one, perform the following procedure.
1)When ignition is “OFF”, connect SUZUKI scan tool to DLC.
2)Set ignition “ON”.
3)Execute “EGR-2 test” in “Utility” menu following instructions displayed on SUZUKI scan tool.
4)If any error is displayed as a result of “EGR-2 test”, perform necessary repair according to error indication and possible cause on SUZUKI scan tool.
5)When ignition is “OFF”, disconnect SUZUKI scan tool from DLC.