Turbocharger Test
Precautions: General safety (00)
After replacing turbocharger with exhaust manifold with new one, perform the following procedure.
1)When ignition is “OFF”, connect SUZUKI scan tool to DLC.
2)Set ignition “ON”.
3)Execute “Turbocharger test” in “Utility” menu following instructions displayed on SUZUKI scan tool.
4)If any error is displayed as a result of “Turbocharger test”, perform necessary repair according to error indication and possible cause on SUZUKI scan tool.
5)When ignition is “OFF”, disconnect SUZUKI scan tool from DLC.