Scan Tool Data (Additional Heater System)
Precautions: General safety (00)
ECM
| Scan tool data | Condition | Normal condition / Reference value |
|---|---|---|
Additional Heater 1 
|
Additional heater No.1 is ON | ON |
| Additional heater No.1 is OFF | OFF | |
| Additional Heater 2 and 3
|
Additional heater No.2 and No.3 are ON | ON |
| Additional heater No.2 and No.3 are OFF | OFF |
Scan Tool Data Definitions
Additional Heater 1 (Additional heater relay No.1 output signal, ON, OFF)
ON: ON command is being output to additional heater relay No.1.
OFF: No command is being output.
Additional Heater 2 and 3 (Additional heater relay No.2 and No.3 output signal, ON, OFF)
ON: ON command is being output to additional heater relays No.2 and No.3.
OFF: No command is being output.