Scan Tool Data

Precautions: Precautions for Body, Cab and Accessories · General safety (00)

Combination Meter

NOTE:

If communication between SUZUKI scan tool and combination meter is not possible, perform the following checks:

•Check communication condition between PC and VCI using SUZUKI scan tool function.
•Check DLC power circuit and ground circuit.
•Check DLC cable. If necessary, check DLC cable by substituting a known-good DLC cable.
•Check CAN communication system. (“Control Module Communication Bus Off” is detected in any control module.)

—M16A model:

—D16AA model:

—K14C model:

•Check combination meter power circuit and ground circuit.

Scan tool data	Normal condition / Reference value	Condition
Battery voltage	10 – 14 V	Engine: Running
RR parking sensor fault	Detect	Fault including contamination is detected in parking sensor (rear-right).
RR parking sensor fault	Not dete	Any conditions except above
RCR parking sensor fault	Detect	Fault including contamination is detected in parking sensor (rear-center-right).
RCR parking sensor fault	Not dete	Any conditions except above
RCL parking sensor fault	Detect	Fault including contamination is detected in parking sensor (rear-center-left).
RCL parking sensor fault	Not dete	Any conditions except above
RL parking sensor fault	Detect	Fault including contamination is detected in parking sensor (rear-left).
RL parking sensor fault	Not dete	Any conditions except above
FR parking sensor fault	Detect	Fault including contamination is detected in parking sensor (front-right).
FR parking sensor fault	Not dete	Any conditions except above
FCR parking sensor fault	Detect	Fault including contamination is detected in parking sensor (front-center-right).
FCR parking sensor fault	Not dete	Any conditions except above
FCL parking sensor fault	Detect	Fault including contamination is detected in parking sensor (front-center-left).
FCL parking sensor fault	Not dete	Any conditions except above
FL parking sensor fault	Detect	Fault including contamination is detected in parking sensor (front-left).
FL parking sensor fault	Not dete	Any conditions except above
Parking sensor system	Equipped	Parking sensor system is installed.
Parking sensor system	Unequip	Parking sensor system is not installed.
Oil Change Conditions	Normal	Oil change interval is set to “Normal”.
	Severe	Oil change interval is set to “Severe”.
	Optional	Oil change interval is set to “Optional”.
Distance from Oil Change Request Light Initialization	—	Oil change distance interval is not set.
	2,500 – 30,000 km	Oil change distance interval is set between 2,500 and 30,000 km (1,500 and 18,000 miles).
	> 30,000 km	Oil change distance interval is set to 30,000 km (18,000 miles) or more.
Period from Oil Change Request Light Initialization	—	Oil change period interval is not set.
	90 – 1,095 days	Oil change period interval is set between 95 and 1,095 days.
	> 1,095 days	Oil change period interval is set to 1,095 days or longer.