Precautions for Working on Glass
Precautions: Precautions for Working on Power Window · Precautions for Body, Cab and Accessories · General safety (00)
Precautions for Applying Primer
•Primer has an important role to enhance adhesion effect of adhesive. Primer to use for body adhesive and that for glass adhesive are different. Use appropriate one. (Do not use gauze or nozzle used for one type for another.)
•Put masking tape to instrument panel and other parts to protect them against primer.
•Shake primer container well before opening it and apply primer evenly.
•Do not apply primer to body surface where adhesive still remains.
•If primer is attached to plastic parts or any place other than intended area by mistake, remove it immediately using white gasoline.
•Refer to primer maker’s instruction for proper handling and drying time.
•Put masking tape to instrument panel and other parts to protect them against primer.
•Shake primer container well before opening it and apply primer evenly.
•Do not apply primer to body surface where adhesive still remains.
•If primer is attached to plastic parts or any place other than intended area by mistake, remove it immediately using white gasoline.
•Refer to primer maker’s instruction for proper handling and drying time.
Precautions for Applying Adhesive
•Install glass within 5 minutes after applying adhesive.
•Adjust adhesive nozzle so that you can apply adhesive to “Shape of Adhesive” specified in section for installation of each glass.
•If adhesive is attached to plastic parts or any place other than intended area by mistake, remove it immediately using white gasoline.
•After applying adhesive to windshield, keep windows open when opening and closing door and do not apply any impact to the windshield until the adhesive is completely dry.
•Do not drive the vehicle until the adhesive completely hardens.
•Do not force the adhesive to dry using infrared light or the like.
•Adjust adhesive nozzle so that you can apply adhesive to “Shape of Adhesive” specified in section for installation of each glass.
•If adhesive is attached to plastic parts or any place other than intended area by mistake, remove it immediately using white gasoline.
•After applying adhesive to windshield, keep windows open when opening and closing door and do not apply any impact to the windshield until the adhesive is completely dry.
•Do not drive the vehicle until the adhesive completely hardens.
•Do not force the adhesive to dry using infrared light or the like.