Scan Tool Utility Table
Precautions: Precautions for Diagnosing Trouble · Precautions for Control Systems · General safety (00)
SUZUKI scan tool has setting change function of BCM as follows. For details of SUZUKI scan tool, refer to its Operator's Manual.
| Item | Setting | Description | |
|---|---|---|---|
| Dead Lock Control Test | — | Deadlock function is performed. | |
| Configuration | Turn Signal Light | 0 / +1 / +2 / +3 | For situations such as lane changes, it is possible to set the number of times the turn signal lights flash when turn signal switch is momentarily switched on and off.
•0: Turn signal lights flash once when turn signal switch is turned on 1 time.
•+1: Turn signal lights flash 2 times when turn signal switch is turned on 1 time. (+1 time on and off for 1 time switching on) •+2: Turn signal lights flash 3 times when turn signal switch is turned on 1 time. (+2 time on and off for 1 time switching on) •+3: Turn signal lights flash 4 times when turn signal switch is turned on 1 time. (+3 time on and off for 1 time switching on) |
| Daytime Running Light | ON / OFF | Set up of the DRL function (operable / non-operable) can be changed. | |
| Foot Light | Illumination/Door / Door / OFF | Foot light lighting condition can be changed.
•Illumination/Door: linked with door opening / closing and lighting switch ON / OFF operation.
•Door: linked with door opening / closing operation. •OFF: OFF |
|
| Door Unlock | 1 Action / 2 Action | Set up of the door unlock function (1 action / 2 action) can be changed. | |