Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING SYSTEM

AIR CONDITIONING SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



DATA LIST

HINT:
Using the intelligent tester's DATA LIST allows switch, sensor, actuator, and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Turn the tester on.

  4. Enter the following menus: DIAGNOSIS / OBD/MOBD / ENGINE / DATA LIST.

  5. Check the value(s) by referring to the table below.

    ENGINE 
    Item
    Measurement Item / (Range) Display
    Normal Condition
    Diagnostic Note
    A/C SIG
    A/C signal / ON or OFF
    ON: A/C ON
    OFF: A/C OFF
    -
    A/C MAG CLUTCH
    A/C magnetic clutch relay / OFF, ON
    ON: A/C magnetic clutch ON
    OFF: A/C magnetic clutch OFF
    -


ACTIVE TEST

HINT:
Performing the intelligent tester's ACTIVE TEST allows relays, VSVs, actuators and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed in the ACTIVE TEST.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Turn the tester on.

  4. Enter the following menus: DIAGNOSIS / OBD/MOBD / AIR CONDITIONER / ACTIVE TEST.

  5. Perform the ACTIVE TEST by referring to the table below.

    AIR CONDITIONER 
    Item
    Test Details / Display (Range)
    Diagnostic Note
    A/C MAG CLUTCH
    (Magnetic clutch relay)
    Magnetic clutch relay / OFF, ON
    -