Home › BODY › ENGINE HOOD / DOOR › BACK DOOR CLOSER SYSTEM

BACK DOOR CLOSER SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC


    G039021E01
  1. Connect the intelligent tester (with CAN VIM) to the DLC3.

  2. Turn the ignition switch ON.

  3. Read the DTCs by following the directions on the tester's screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.


CLEAR DTC
  1. Connect the intelligent tester (with CAN VIM) to the DLC3.

  2. Turn the ignition switch ON.

  3. Erase the DTCs by following the directions on the tester's screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.