Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY

HEADLIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER ASSEMBLY


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


3. REMOVE RADIATOR SUPPORT SEAL UPPER


    E116117
  1. Using a clip remover, remove the 10 clips and radiator support seal upper.



4. REMOVE FRONT BUMPER FILLER


    E116118
  1. Remove the clip and the front bumper filler.



5. REMOVE HEADLIGHT ASSEMBLY
  1. Disconnect the connector.



    E116119
  1. Remove the bolt, 3 screws, and the headlight assembly.