SEAT POSITION SENSOR > INSTALLATION |
| 1. INSTALL SEAT POSITION SENSOR |
Check that the ignition switch is off.
Check that the negative battery (-) terminal is disconnected.
Install the seat position sensor with a new bolt.
Check that there is no looseness in the installation parts of the seat position sensor.
Connect the connector to the seat position sensor.
| 2. INSTALL FRONT SEAT ASSEMBLY LH (for Manual Seat) |
Place the front seat assembly LH in the cabin.
Connect the connectors under the front seat assembly LH.
Install the front seat assembly LH with the 4 bolts.
| 3. INSTALL FRONT SEAT ASSEMBLY LH (for Power Seat) |
Place the front seat assembly LH in the cabin.
Connect the connectors under the front seat assembly LH.
Install the front seat assembly LH with the 4 bolts.
| 4. INSTALL SEAT TRACK BRACKET COVER INNER LH (for Manual Seat) |
| 5. INSTALL SEAT TRACK BRACKET COVER INNER LH (for Power Seat) |
| 6. INSTALL SEAT TRACK OUTER COVER LH (for Manual Seat) |
| 7. INSTALL SEAT TRACK OUTER COVER LH (for Power Seat) |
| 8. INSTALL SEAT TRACK BRACKET COVER INNER FRONT LH (for Manual Seat) |
| 9. INSTALL SEAT TRACK BRACKET COVER INNER FRONT LH (for Power Seat) |
| 10. INSTALL SEAT TRACK BRACKET COVER OUTER FRONT LH (for Manual Seat) |
| 11. INSTALL SEAT TRACK BRACKET COVER OUTER FRONT LH (for Power Seat) |
| 12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 13. INSPECT SLIDE ADJUSTER LOCK (for Manual Seat) |
| 14. INSPECT POWER SEAT OPERATION (for Power Seat) |
| 15. INSPECT SEAT HEATER OPERATION (w/ Seat Heater System) |
| 16. INSPECT SRS WARNING LIGHT |
Inspect the SRS warning light (Click here).