Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › SEAT POSITION SENSOR

SEAT POSITION SENSOR > REMOVAL

for Preparation Click here



1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.



3. REMOVE SEAT TRACK BRACKET COVER OUTER FRONT LH (for Manual Seat)
  1. Using a screwdriver, pry out the seat track bracket cover outer front LH.

    HINT:
    Tape the screwdriver tip before use.



4. REMOVE SEAT TRACK BRACKET COVER OUTER FRONT LH (for Power Seat)
  1. Using a screwdriver, remove the seat track bracket cover outer front LH.

    HINT:
    Tape the screwdriver tip before use.



5. REMOVE SEAT TRACK BRACKET COVER INNER FRONT LH (for Manual Seat)

HINT:
Removal procedure of the seat track bracket cover inner front LH is the same as for the seat track bracket cover outer front LH.



6. REMOVE SEAT TRACK BRACKET COVER INNER FRONT LH (for Power Seat)


7. REMOVE SEAT TRACK OUTER COVER LH (for Manual Seat)

HINT:
Removal procedure of the seat track outer cover LH is the same as for the seat track bracket cover outer front LH.



8. REMOVE SEAT TRACK OUTER COVER LH (for Power Seat)

HINT:
Removal procedure of the seat track outer cover RH is the same as for the seat track bracket cover outer front LH.



9. REMOVE SEAT TRACK BRACKET COVER INNER LH (for Manual Seat)

HINT:
Removal procedure of the seat track bracket cover inner LH is the same as for the seat track bracket cover outer front LH.



10. REMOVE SEAT TRACK BRACKET COVER INNER LH (for Power Seat)

HINT:
Removal procedure of the seat track bracket cover inner LH is the same as for the seat track bracket cover outer front LH.



11. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat)
  1. Disconnect the connectors under the front seat assembly LH.

  1. Remove the 4 bolts and front seat assembly LH.

    NOTICE:
    Be careful not to damage the body.



12. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat)
  1. Disconnect the connectors under the front seat assembly LH.

  1. Remove the 4 bolts and front seat assembly LH.

    NOTICE:
    Be careful not to damage the body.



13. REMOVE SEAT POSITION SENSOR


    H042353
  1. Disconnect the connector from the seat position sensor.

  1. Remove the bolt and seat position sensor.