SIDE AIRBAG SENSOR > INSTALLATION |
| 1. INSTALL SIDE AIRBAG SENSOR LH |
Check that the ignition switch is off.
Check that the battery negative (-) terminal is disconnected.
![]() |
Install the side airbag sensor LH with the 2 nuts.
Check that there is no looseness in the installation parts of the side airbag sensor LH.
Connect the connector to the side airbag sensor LH.
| 2. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH |
| 3. INSTALL CENTER PILLAR GARNISH LOWER LH |
| 4. INSTALL LAP BELT OUTER ANCHOR COVER |
| 5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
| 6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
| 7. INSTALL FRONT DOOR SCUFF PLATE LH |
![]() |
Install the scuff plate. Engage the claw labeled A, claw labeled B, 4 claws labeled C, claw labeled D and claw labeled E.
| 8. INSTALL REAR DOOR SCUFF PLATE LH |
![]() |
Install the scuff plate. Engage the claw labeled A, claw labeled B, 2 claws labeled C and claw labeled D.
| 9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 10. INSPECT SRS WARNING LIGHT |
Inspect the SRS warning light (Click here).