REAR AIRBAG SENSOR > INSTALLATION |
| 1. INSTALL REAR AIRBAG SENSOR LH |
Check that the ignition switch is off.
Check that the battery negative (-) terminal is disconnected.
![]() |
Install the rear airbag sensor LH with the 2 bolts.
Check that there is no looseness in the installation parts of the rear airbag sensor LH.
Connect the connector to the rear airbag sensor LH.
| 2. INSTALL DECK SIDE TRIM COVER LH |
| 3. INSTALL DECK TRIM SIDE BOARD UPR LH |
| 4. INSTALL LAP BELT OUTER ANCHOR COVER REAR NO. 1 SEAT |
| 5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
| 6. INSTALL REAR DOOR SCUFF PLATE LH |
| 7. INSTALL DECK FLOOR BOX LH |
| 8. INSTALL REAR FLOOR MAT SUPPORT PLATE REAR |
| 9. INSTALL DECK BOARD ASSEMBLY |
| 10. INSTALL TONNEAU COVER RETRACTOR SUB-ASSEMBLY |
| 11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 12. INSPECT SRS WARNING LIGHT |
Inspect the SRS warning light (Click here).