Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › CENTER AIRBAG SENSOR ASSEMBLY

CENTER AIRBAG SENSOR ASSEMBLY > REMOVAL

for Preparation Click here



1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


3. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY


    B062740E01
  1. Disengage the 5 clips and 2 claws, and remove the console upper rear panel, and then disconnect the connectors.



4. REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER


    B062741E01
  1. Disengage the 6 clips and 2 claws, and then remove the upper console panel sub-assembly.

    NOTICE:
    Be careful not to snap the claws during the operation.



5. REMOVE CONSOLE UPPER PANEL GARNISH NO. 1


    B062742E01
  1. Disengage the clip.

  1. Pull the No. 1 console upper panel garnish rearward to be removed.



6. REMOVE CONSOLE UPPER PANEL GARNISH NO. 2


7. REMOVE CONSOLE BOX ASSEMBLY REAR


    B078371E01
  1. Disconnect the connectors.

  1. Remove the 6 bolts <B> and rear console box assembly.



8. REMOVE CONSOLE BOX MOUNTING BRACKET FRONT


9. REMOVE CONSOLE BOX DUCT NO. 1


    I033466
  1. Remove the clip and disconnect the console box duct No. 1.



10. REMOVE CENTER AIRBAG SENSOR ASSEMBLY


    H042342
  1. Disconnect the 3 connectors from the center airbag sensor assembly.

  1. Remove the 3 bolts and the center airbag sensor assembly.