Home › ENGINE ยท 1GR-FE › COOLING › RADIATOR

RADIATOR > ON-VEHICLE CLEANING

for Preparation Click here



1. INSPECT FINS FOR BLOCKAGE


A073603E04
  1. If the fins are clogged, wash them with water or a steam cleaner, then dry them with compressed air.

    NOTICE:
    1. If the distance between the steam cleaner and core is too small, there is a possibility of damaging the fins, so keep to the following injection distances.
    Injection Pressure kPa (kg/cm2, psi)
    Injection Distance mm (in.)
    2,942 to 4,903 (30 to 50, 427 to 711)
    300 (11.811)
    4,903 to 7,845 (50 to 80, 711 to 1,138)
    500 (19.685)
    1. If the fins are bent, straighten them with a screwdriver or pliers.
    2. Be careful not to expose electronic components to water.