Home › COMMUNICATION SYSTEM › MULTIPLEX COMMUNICATION › MULTIPLEX COMMUNICATION SYSTEM

MULTIPLEX COMMUNICATION SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC


    A066288E02
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on.

  3. Enter the following menus: DIAGNOSIS/OBD/MOBD/BODY/DTC INFO.

  4. Check the DTCs on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on.

  3. Erase the DTCs by following the prompts on the tester screen.

  4. Enter the following menus: DIAGNOSIS/OBD/MOBD/BODY/DTC INFO.

    HINT:
    Refer to the intelligent tester operator's manual for further details.