Home
›
COMMUNICATION SYSTEM
›
MULTIPLEX COMMUNICATION
›
MULTIPLEX COMMUNICATION SYSTEM
MULTIPLEX COMMUNICATION SYSTEM > SYSTEM DIAGRAM
for Preparation
Click here
MULTIPLEX COMMUNICATION SYSTEM (BEAN) DESCRIPTION
The BEAN communication line is used to control the following items:
Instrument panel junction block assembly (Body ECU)
Theft warning ECU assembly (Theft deterrent ECU)
Multiplex network door ECU back (Back door ECU)
If there is a short-circuit (bus-down) in the line, communication to the system that had a short-circuit (bus-down) will be disabled and the DTC concerning the system will be output from the multiplex network body ECU.