Home › ENGINE ยท 1GR-FE › ENGINE CONTROL SYSTEM › CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    G039021E01
  1. Check the operation.

    1. Turn the ignition switch to ON.

    2. Turn the intelligent tester ON.

    3. Start the engine and warm it up.

    4. Select the following menu items: DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST / VVT CTRL B1.

    5. Operate the OCV using the intelligent tester, then check the engine speed.

      Standard:
      Tester Operation
      Specified Condition
      OCV OFF
      Normal engine speed
      OCV ON
      Rough idling or engine stalls

      If the operation is not as specified, check the camshaft timing oil control valve, wire harness and ECM.