PARK / NEUTRAL POSITION SWITCH > INSTALLATION |
| 1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
![]() |
Install the park/neutral position switch with the bolt.
Install a new lock washer and the nut.
Bend the claws on the lock washer to stake the nut.
Adjust the park/neutral position switch .
| 2. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR |
| 3. INSTALL REAR ENGINE UNDER COVER ASSEMBLY |
| 4. INSTALL NO.1 ENGINE UNDER COVER SUB-ASSEMBLY |
| 5. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY |