Symbols (Terminal No.)
| Wiring Color
| Terminal Description
| Condition
| Specification
|
+B (O3-1) - GND (O6-3)
| R - W-B
| Power source (ECU-B Fuse)
| Always
| 10 to 14 V
|
DIA (O3-2) - GND (O6-3)
| V - W-B
| Diagnosis (DLC3)
| IG switch ON
| Pulse generation
|
GND (O3-3) - Body ground
| W-B - Body ground
| Ground
| Always
| Below 1 Ω
|
FSR- (O3-4) - GND (O3-3)
| B - W-B
| Center airbag sensor assembly communication line (-)
| Always
| Below 1 Ω
|
BGND (O3-5) - GND (O3-3)
| GR - W-B
| Passenger side buckle switch ground line
| Always
| Below 1 Ω
|
IG (O3-7) - GND (O3-3)
| BR - W-B
| Power source (IG2 Fuse)
| IG switch ON
| 10 to 14 V
|
FSR+ (O3-8) - FSR- (O3-4)
| W - B
| Center airbag sensor assembly communication line
| IG switch ON
| Pulse generation
|
BSW (O3-9) - BGND (O3-5)
| L - GR
| Passenger side buckle switch line
| Buckle switch ON Buckle switch OFF
| Pulse generation
|
SGD1 (O4-1) - GND (O3-3)
| G - W-B
| Occupant classification sensor front LH ground line
| Always
| Below 1 Ω
|
SGD2 (O4-2) - GND (O3-3)
| O - W-B
| Occupant classification sensor front RH ground line
| Always
| Below 1 Ω
|
SGD3 (O4-3) - GND (O3-3)
| W - W-B
| Occupant classification sensor rear LH ground line
| Always
| Below 1 Ω
|
SGD4 (O4-4) - GND (O3-3)
| BR - W-B
| Occupant classification sensor rear RH ground line
| Always
| Below 1 Ω
|
SVC3 (O4-5) - SGD3 (O4-3)
| GR - W
| Occupant classification sensor rear LH power supply line
| IG switch ON, a load is applied to occupant classification sensor rear LH
| 4.5 to 5.1 V
|
SVC4 (O4-6) - SGD4 (O4-4)
| V - BR
| Occupant classification sensor rear RH power supply line
| IG switch ON, a load is applied to occupant classification sensor rear RH
| 4.5 to 5.1 V
|
SIG1 (O4-7) - SGD1 (O4-1)
| BR - G
| Occupant classification sensor front LH signal line
| IG switch ON, a load is applied to occupant classification sensor front LH
| 0.2 to 4.7 V
|
SIG2 (O4-8) - SGD2 (O4-2)
| L - O
| Occupant classification sensor front RH signal line
| IG switch ON, a load is applied to occupant classification sensor front RH
| 0.2 to 4.7 V
|
SIG3 (O4-9) - SGD3 (O4-3)
| Y - W
| Occupant classification sensor rear LH signal line
| IG switch ON, a load is applied to occupant classification sensor rear LH
| 0.2 to 4.7 V
|
SIG4 (O4-10) - SGD4 (O4-4)
| B - BR
| Occupant classification sensor rear RH signal line
| IG switch ON, a load is applied to occupant classification sensor rear RH
| 0.2 to 4.7 V
|
SVC1 (O4-11) - SGD1 (O4-1)
| R - G
| Occupant classification sensor front LH power supply line
| IG switch ON, a load is applied to occupant classification sensor front LH
| 4.5 to 5.1 V
|
SVC2 (O4-12) - SGD2 (O4-2)
| W - O
| Occupant classification sensor front RH power supply line
| IG switch ON, a load is applied to occupant classification sensor front RH
| 4.5 to 5.1 V
|